6000L/H Ion Exchange Water Purification System Dual Tank

Dual tank alternating water softener to remove dissolved minerals (hardness salts) 6000L/hr

What is a Water Softener? The water softener is just a special type of "filter" that removes the calcium and magnesium in hard water by using plastic beads and cleans itself periodically by a process called “regeneration.”

Water softeners have three main components: A mineral tank, brine tank and control valve. Smaller capacity models combine the mineral tank and brine tanks into one cabinet, but the two tanks are still separated within the cabinet.

Larger flow capacity systems have separate stand alone mineral and brine tanks.

Ion exchange is a well known type of water softening system that has been available for quite a long time. Ion exchange replaces the calcium and magnesium in water with salt, potassium or hydrogen. Of these three options salt is perhaps the best known water softening regeneration solution.

An ion exchange water softener consists of a resin tank and a brine tank. The water passes through the resin bed and the hardness mineral ions in the water are exchanged for sodium (or potassium) ions. When the resin is saturated with hardness minerals the systems goes through a regeneration cycle that flushes brine solution through the resin bed exchanging the hardness mineral ions with sodium ions. The hardness minerals are then washed down the drain leaving the resin ready to go through the process again.

After the water softener treats the water the water enters the household water supply as soft water. Softened water will contain either sodium or potassium depending on which is used in the softening process.

Sodium more readily available and less expensive than potassium but there are concerns about the additional sodium intake particularly for anyone on a low sodium diet. Other concerns with regards to the use of sodium is the environmental effects of the large amounts of salt that are released into the waste water supply during the regeneration cycle.

Technoloty index and working

01.Water pressure:0.18-0.6Mpa

02.Working temperature:1°c-55°c

03.Hardness of raw water: <8mmol/L

04.Operation method:manual/automatic

05.Hardness of effluent water: ≤0.03mmol/L

06.water flow: 0.3-20 t/h

Rebirth method:resin exchange with ion inw water

Control method: time or flow

Working electric: 220V/50Hz

Usage:

System automatic water softener widely used in steam boiler, heating boiler, exchanger, air conditioner, and other systems water softener, also used in hotel, restaurant, office, and other life water treatment and food, drinking, wine, washing, textile, chemical, medicine and other industrial softener water treatment.